RAWRR!
Wednesday, April 29, 2009
Anyone want to loan me a few mill'??
Although I'm a die hard hot rod guy, there will always be a sweet spot in heart for 50's and 60's race cars. But in my mind, there were two cars that always stood out... The GT40 and the Shelby Daytona Coupe. Not the new reproduction cars... THE REAL ONES! The one that will always rule my world will be the 1965 Shelby Daytona Coupe. Maybe it's like anything else in the world, where you want something you can never have (only SIX were ever made!)... but I just got wind I have a chance! The perfectly restored and driven hard #4 is going up for Auction on May 18th. Anyone want to lend me about, say... mmmmm.... $8 MILLION DOLLARS or so? I can't guarantee any kind of payback, but I'll take you for a ride in it. :)
It is being suggested that it will be one of the highest bid cars. The current record being held by the 1961 Ferrari California Spyder that sold for $10,894,900! Good LORD, that's a lot of money! An amazing car though! "If you have the means, I highly recommend you pick one up. It's so choice." -Ferris Bueller
So how about that loan??
Anyway, The Shelby will be up for auction in May, so get your bids in. To read more about the auction and the story about #4, more details can be found at AutoBlog's page ---> HERE
It is being suggested that it will be one of the highest bid cars. The current record being held by the 1961 Ferrari California Spyder that sold for $10,894,900! Good LORD, that's a lot of money! An amazing car though! "If you have the means, I highly recommend you pick one up. It's so choice." -Ferris Bueller
So how about that loan??
Anyway, The Shelby will be up for auction in May, so get your bids in. To read more about the auction and the story about #4, more details can be found at AutoBlog's page ---> HERE
Monday, April 27, 2009
Monday Modified
Here's a little something for those of you who dig scratch-built, one-man, modified roadsters! I LOVE this thing!
Built by Rich of Retro Rides by Rich Great builder and pays attention to detail!
Built by Rich of Retro Rides by Rich Great builder and pays attention to detail!
Thursday, April 23, 2009
This is what it's ALL about RIGHT HERE!
DRIVING HOT RODS!!!! These videos were posted by Piero (Mad Fabricators Society) from their trip to Lone Start Roundup in Austin, TX this year. If you "get it" then you'll dig the videos...
That's it! Next year I have to be there!
Thanks for uploading these Piero!
Players include Piero in Live wire, Bob Bleed, Paul Kelly, Alex Gambino, Jesse James, Mark Ford, Aaron Grote, and I'm sure I'm missing a couple or four, so someone call me out if I am!
While you're at it, check out South Austin Speed Shop!
You can see more on his trip to LSR ---> HERE
That's it! Next year I have to be there!
Thanks for uploading these Piero!
Players include Piero in Live wire, Bob Bleed, Paul Kelly, Alex Gambino, Jesse James, Mark Ford, Aaron Grote, and I'm sure I'm missing a couple or four, so someone call me out if I am!
While you're at it, check out South Austin Speed Shop!
You can see more on his trip to LSR ---> HERE
Wednesday, April 22, 2009
YAY!
One little task at a time... Getting everything ready for that Hemi build. Block is almost ready, but still need a few more little things.
Here's this though...
Here's this though...
Thursday, April 16, 2009
Thanks out to Big Scott and Maurice
This picture was taken by Maurice van den Tillaard (Flyin' Dutchman)while he was here. I got a chance to go for a ride on Big Scott's Triumph (Cycle Zombies). Love that bike! Rad little scoot!
Thanks again guys! What a blast! I really miss owning a Triumph. They really are special bikes!
Thanks again guys! What a blast! I really miss owning a Triumph. They really are special bikes!
Buy these 392 Pistons!
These things have got to go! Good deal folks! Here's the skinny:
Alright, so I've got these +.040 over cast 392 pistons. They were in one of my Hemis and were only run for approximately 1-hour total run time at the very most. They are HY DUTY brand. They're basically new pistons, but two of them just have a couple surface blems on the skirt. I suspect from sitting in the bores and will probably just come off with a little scotch brite, but I didn't want to try. Nothing to worry about though.
The wrist pin size is .9840" and they ARE included!
Piston measures approximately 2.070" from the top of the dome to the wrist pin center (sort of hard to measure). The diameter at the skirt measures 4.0385". A VERY reliable source says these pistons match some he has on the shelf that are labeled as 1958 with 10:1 compression.
I measured the finished bore size at approximately 4.040". You would need to give them to your machinist to make sure you get the right size bore, obviously. Rings are included and look to be Moly type.
$200 plus shipping and I'll even pack 'em up real nice in bubble wrap and everything so they get to you safe and sound.
Just put 'em on and go! If you have questions just ask or email me!
scootermcrad@yahoo.com
Alright, so I've got these +.040 over cast 392 pistons. They were in one of my Hemis and were only run for approximately 1-hour total run time at the very most. They are HY DUTY brand. They're basically new pistons, but two of them just have a couple surface blems on the skirt. I suspect from sitting in the bores and will probably just come off with a little scotch brite, but I didn't want to try. Nothing to worry about though.
The wrist pin size is .9840" and they ARE included!
Piston measures approximately 2.070" from the top of the dome to the wrist pin center (sort of hard to measure). The diameter at the skirt measures 4.0385". A VERY reliable source says these pistons match some he has on the shelf that are labeled as 1958 with 10:1 compression.
I measured the finished bore size at approximately 4.040". You would need to give them to your machinist to make sure you get the right size bore, obviously. Rings are included and look to be Moly type.
$200 plus shipping and I'll even pack 'em up real nice in bubble wrap and everything so they get to you safe and sound.
Just put 'em on and go! If you have questions just ask or email me!
scootermcrad@yahoo.com
Tuesday, April 14, 2009
Darth Walter has a Hemi - let's get started
Alright, so my buddy Paulie (AKA Dreddybear) down in Tejas, is building this '29 Ford Coupe with a 331 Chrysler Hemi and he's off to a great start. Wanted to share what he's up to. It's a coupe I've been following and one worthy of keeping an eye on. I'll bring you updates as I see them and hopefully I'll get to see it in the flesh next year at the Lone Star Round-up.
All pictures were takin' by Paul and the story can be followed in his words on the HAMB in this thread ---> DARTH WALTER
All pictures were takin' by Paul and the story can be followed in his words on the HAMB in this thread ---> DARTH WALTER
Wednesday, April 8, 2009
Birth of Atomic Punk!
Little video put together by Aaron Grote. Posted on the HAMB, I figured I would put throw it up here as well! Love this car!
Check out his website and help a brotha' OUT! --> www.groterodshop.com
Check out his website and help a brotha' OUT! --> www.groterodshop.com
Friday, April 3, 2009
Steve Davis and the Gear Grinder Gathering
When Maurice van den Tillaard and Michael van der Lee came to visit (Flyin' Dutchman and General Wheels), we went to this year's Gear Grinder meeting so Maurice could touch base with his good friends Bob and Judy. The gathering was at Steve Davis' shop here in Huntington Beach. Some neat stuff going on and a plethora of awesome old metal fab tools! Here's some sites from the shop and a video of an FED sounding off for us. Mmmm... Hemi.
